Peristaltic pump ACP-001

Application

The peristaltic pump Ankersmid APP-SR25 has been developed for the continuous condensate removal in most gas coolers and condensate vessels in analytical applications.

Condensate flow back is impossible.

The capacity of 0,25 l/hr guarantees a complete condensate removal, for high dew points.

Description

The pump SR25 is self-suctioning and designed for continuous operation.

Driven by a synchronous motor a system of pulleys press the condensate thru a special tube with very long runtime.

These pulleys are presses by 4 springs on the peristaltic tube.

With a speed of 5 rpm, the two PVDF hose  pulleys and the novoprene hose guarantee a good mechanical and chemical resistance with a long life.

Changing the peristaltic tube is an easy procedure that only takes seconds.

• This pump can be installed inside our compressor and peltier cooler.

• Also available in ABS housing

• With a special bracket this pump can be clicked on the Ankersmid Modular System

·         Peristaltic pump SR25

·         capacity: 0,25l/h

·         Pressure range: 200mbar up to 2,2bar abs.

·         connections: nipples or DN 4/6

·         Material: Novopren®, PVDF.

·        Power: 230/115V, 50/60Hz.

 eristaltic pump ACP-010

Application

The peristaltic pump Ankersmid APP-SR25c has been developed for the continuous condensate removal in most gas coolers and condensate vessels in analytical applications.

Condensate flow back is impossible.

The capacity of 0,25 l/hr guarantees a complete condensate removal, for high dew points.

Description

The pump SR25c is self-suctioning and designed for continuous operation.

Driven by a synchronous motor a system of pulleys press the condensate thru a special tube with very long runtime.

These pulleys are presses by 4 springs on the peristaltic tube.

With a speed of 5 rpm, the two PVDF hose  pulleys and the novoprene hose guarantee a good mechanical and chemical resistance with a long life.

Changing the peristaltic tube is an easy procedure that only takes seconds.

• This pump can be installed inside our compressor and peltier cooler.

• Also available in ABS housing

• With a special bracket this pump can be clicked on the Ankersmid Modular System