Filter.
Type to search element
Type of measurement
Show More
Principal
Show More
Brand
Show More
Industry
Show More
Branch: Glass and ceramics, Filtered results: 75
The nCLD EL S is the next generation in single-channel NO/NOX measurement. Unique in speed and precision
The solution for simultaneously measured NO and NOx has got a name: CLD 822. The heated inlet copes with hot and humid gas samples no gas cooler required!
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
Versatile , economical, multi- component NDIR + O2 analyzer for continuous measurement
The Flame-Ionisation-Detector (FID) 1230 Module measures Total Hydrocarbons in a wide range of applications
The summit analyzer area for a wide variety of applications in highly corrosive and complex applications.
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.
The AULA-254 Gold is a fully automated system for analyzing traces of mercury in aqueous and digested samples
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory.
Gas analyzers with an FID (flame ionization detector) are well suited for the continuous total hydrocarbon measurement.
..Combinatie van de Ultramat 6 en Oxymat 6 meetsystemen in 1 19” behuizing tot een compacte plaatsbesparende oplossing voor meting van 2 NDIR componenten en zuurstof.
This wall mounted analyser is a compact, robust weatherproofed version. The environmental protection mode is IP55.
The Flame Ionisation Detector 2000MP is analyzing hydrocarbons in SHED-chambers of different dimensions
after 30 years of a good gasconditioning, we have a new a innovated range of sampling !
Sampling start with the sample take off point. If you have a colt spot, your measurements are worthless or your analysers can be damaged
Heated Line are used to transport the sample to the sampling unit which prepares the gas to be measured.
Our gascoolers reduce the dewpoint to a stable 5 °C. This resuls in a correct and reliable measurement
Fast loop liquid Samplers which collect process samples without emissions to the atmosphere or exposure to the operator
Membrane pumps with rotative or linear motor, out of PTFE, Kynar PVDF or Stainless Steel. Peristaltic pumps
Automatic condensate traps or condensate collectors out of different materials,.
Rota meters out of glass or Plexiglas with or without needle valve. Flow alarm
Complete range of PVDF , PP , PTFE or Stainless Steel Connectors, fittings and manifolds
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Various gas / liquid filters
filters can be combined as well
The Spark is the lowest cost CRDS analyzer on the market, offering powerful performance on a budget, plus the highest range (5 orders of magnitude!) and fastest speed of any Tiger analyzer! Available for detection of H2O and other molecules in a variety of matrices, the Spark is ideal for cylinder analysis in industrial and medical gases, and many other applications.
The CO-rekt allows the use of Tiger's powerful CRDS technology in harsh industrial environments. Outfitted with a purged enclosure, the CO-rekt meets Class I, Div 2 specifications for use as CO, H2O, CH4 and CO2 analyzer in SMR and HyCO processes, among others.
The HALO is our most versatile analyzer, with a perfect blend of high performance, compact footprint, and cost efficiency. The HALO is used to analyze an enormous variety of gases, including hydrides, fluorides, rare gases, and more.
The LaserTrace is our most powerful trace gas analyzer with detection limits as low as 50 ppt, capable of measuring four molecules at a time on up to four separate lines. The system is the semi industry standard to monitor H2O, CH4 and O2 in bulk gases, but is also available for many other molecules and applications.
The Prismatic 2 is a multi-species analyzer capable of monitoring up to four trace molecules in a single gas stream. It is an ideal solution for applications that require the simultaneous analysis of multiple analytes in real-time, for instance, quality control of fuel-cell grade hydrogen or monitoring of unmanned ASUs.
For environmental monitoring and analysis in ambient air, Tiger Optics packages Cavity Ring-Down Spectroscopy in the compact, watchful Tiger-i.
The ALOHA H2O series offers the world's best detection limits for moisture in ammonia (as low as 2 ppb). Ultra-pure ammonia is a critical building block for the manufacture of HB LEDs and for advanced GaN on Si devices.
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases
Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop.
For emissions and pollution monitoring we provide dust measurement technique for legally required and process-related measuring tasks.
The Ankersmid APA Series is a precise oxygen gauge for continuous monitoring purposes. The instrument is microprocessor controlled with self-diagnosis capability
The continuous velocity and temperature measurement is very important when operating a system with gas flows (for example indoor exhaust air, exhaust gases).
The oxygen ana;lyser OMD 14 is used for the measurement of the oxygen concentration in flue gases and process gases.
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.
atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use
The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area
The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).
Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.
Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.
It can be used for measurement of the concentration of CO, CO2 and O2 in sample gases simultaneously.
Gasboard 3000 flue gas analyzer can be used for measurement of the concentration of up to 5 gases such as SO2, NO,CO, CO2 and O2 components in sample gases simultaneously
A complete wall-mounted biogas analysis system consists of a rack type biogas analyzer Gasboard-3200, metal case, and gas conditioning system
Delivering the broadest range of measurement and analytical technologies for process clarity and insight.
This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces,
Get reliable, high performance conductivity measurements with the durable Thermo Scientific™ Orion™ 2002SS and 2002CC Conductivity Cells.
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
A self-sufficient system with almost unlimited possibilities. The Litronic FMS II type moisture measuring installation has been used for decades in a wide range of industries to measure the moisture content of various materials in real time.
Process control & process safety in a single analyzer
Designed for long OPLs & high ranges
Baseline-insensitive
All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels
Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements
The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
measurement of up to 8 gas components in flue gas and for process control
measurement of up to 5 gas components in flue gas and for process control
max. 11 infrared components as well as oxygen
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
The Liebherr P78 sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes
Small, fine, excellent: The Liebherr P30-S sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes.
The CAN bus is used in on- and off-road applications, vehicles in the construction and agricultural sectors as well as in engines. The CAN bus is integrated in the sensor.
The Liebherr Litronic WMS II water content meter is used to measure the moisture or water content of a wide range of water content
- Evaluation of the complex dielectric in the high frequency stray field
- Freely scalable measuring range
- Material curve switching
- Sensor replacement without recalibration
- Temperature compensation
Liebherr offers certified sensors for determining the moisture in bulk materials for the potentially explosive atmospheres Zone 21 and 22.
A self-sufficient moisture measuring installation with high connectivity and many interesting possibilities. With ProfiNet technology on board, extensive signal processing and WEB-based access, we are ready for Industry 4.0.