Filter.
Type to search element
Type of measurement
Show More
Principal
Show More
Brand
Show More
Industry
Show More
Branch: Water & Environment, Filtered results: 86
Laser Multipass Analyzer 11 m path length for trace measurements
of O2, H2S, HF, HCl, NH3, H2O, CO,...
The Messenger is the electronics unit for up to 4 single-channel sensors. This may also be of different types. The measured values can mathematically linked and utilized.
The turbidity probe model 22E-LC uses the principle of light absorption to detect dissolved or suspended particles in liquids.
The ultrasonic probe model AS3, together with transmitter model AT3, has been specially designed to measure particle concentration in a variety of liquids.
The sensor model LAS uses the principle of light absorption to detect dissolved or
suspended particles in liquids.
The sensor model MoniSpec-AD uses the principle of dual channel light absorption to detect colour in liquids.
The universal transmitter model Messenger can be used with all optical sensors of the
Monitek series.
The turbidity sensor Model MoniTurb-F uses the principle of 12° forward scattered light to detect suspended particles in liquids.
The turbidity sensor Model MoniTurb-S uses the principle of 90° side scattered light to detect particles in liquids.
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.
The AULA-254 Gold is a fully automated system for analyzing traces of mercury in aqueous and digested samples
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory.
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Very low detection limits
ATEX and CSA certified
Short response time
The Spark is the lowest cost CRDS analyzer on the market, offering powerful performance on a budget, plus the highest range (5 orders of magnitude!) and fastest speed of any Tiger analyzer! Available for detection of H2O and other molecules in a variety of matrices, the Spark is ideal for cylinder analysis in industrial and medical gases, and many other applications.
The CO-rekt allows the use of Tiger's powerful CRDS technology in harsh industrial environments. Outfitted with a purged enclosure, the CO-rekt meets Class I, Div 2 specifications for use as CO, H2O, CH4 and CO2 analyzer in SMR and HyCO processes, among others.
The HALO is our most versatile analyzer, with a perfect blend of high performance, compact footprint, and cost efficiency. The HALO is used to analyze an enormous variety of gases, including hydrides, fluorides, rare gases, and more.
The LaserTrace is our most powerful trace gas analyzer with detection limits as low as 50 ppt, capable of measuring four molecules at a time on up to four separate lines. The system is the semi industry standard to monitor H2O, CH4 and O2 in bulk gases, but is also available for many other molecules and applications.
The Prismatic 2 is a multi-species analyzer capable of monitoring up to four trace molecules in a single gas stream. It is an ideal solution for applications that require the simultaneous analysis of multiple analytes in real-time, for instance, quality control of fuel-cell grade hydrogen or monitoring of unmanned ASUs.
For environmental monitoring and analysis in ambient air, Tiger Optics packages Cavity Ring-Down Spectroscopy in the compact, watchful Tiger-i.
The ALOHA H2O series offers the world's best detection limits for moisture in ammonia (as low as 2 ppb). Ultra-pure ammonia is a critical building block for the manufacture of HB LEDs and for advanced GaN on Si devices.
Response time down to one second
Suitable for high temperatures
Multiple configurations
Fast response time
Automatic health check
Suitable for harsh environment
Fast response time
Stable calibration
Easy to operate
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases
Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop.
We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.
For emissions and pollution monitoring we provide dust measurement technique for legally required and process-related measuring tasks.
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.
atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use
The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area
The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).
Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.
Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.
Industrial plants requiring approval are subject to strict requirements for compliance of emissions limit values.
Thermo Scientific™ Orion™ product line is well known around the world for excellence in water and liquid analysis. Our meters, electrodes, buffers,
The Thermo Scientific Orion electrode line offers a wide variety of quality pH electrodes to choose from.
Measurement by ISE can be performed in virtually every laboratory. ISEs measure ion concentrations in samples such as water, food, pharmaceuticals and biological samples.
Electrical conductivity is an inherent property of most materials, and ranges from extremely conductive materials such as metals to non-conductive materials like plastic or glass.
Dissolved oxygen is often referred to as DO. It is a measure of the amount of oxygen in a solution.
Colorimeters and Turbidity meters both employ optical measurements. Optical measurements use light to quantify the amount of a colored or cloudy sample.
Perform routine water quality parameter measurements in your wastewater and drinking water
Get reliable, high performance conductivity measurements with the durable Thermo Scientific™ Orion™ 2002SS and 2002CC Conductivity Cells.
Continuously monitor oxygen across a wide variety of low and trace level ppb level applications with the Thermo Scientific™ Orion™ 1816DO Low-Level Dissolved Oxygen Analyzer
Get continuous online monitoring and control of steam cycle and boiler chemistry with the Thermo Scientific™ Orion™ 2117LL Low-Level Chloride Analyzer, for use with power generation applications requiring chloride measurement at trace levels.
Maximize up-time and keep your plant in pristine operation with the versatility and performance of the Thermo Scientific™ Orion™ 2109XP Fluoride Analyzer. It offers accuracy, reliability and ease of use to best meet the demands of your fluoride analysis.
Reduce operational costs while producing the highest purity steam with the Thermo Scientific™ Orion™ 2110XP Ammonia Analyzer. This analyzer provides continuous, direct and precise measurements for the control and optimization of boiler ammonia levels.
Concentration, NIR, VIS, UV & color measurement for both liquid and gas.
Process photometer for color and concentration measurements
Process photometer for UV measurement in gases and liquids
Process photometer for NIR measurement for concentration and trace water measurements
Industrial Turbidimeter for turbidity measurement in accordance with International Standard ISO7027:1999(E).
industrial Fluorescence and turbidity meter for the measurement of oil in water
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
Polarimetry will provide information about the molecular structure, the concentration of the substance and sometimes information about the solvent used
A self-sufficient system with almost unlimited possibilities. The Litronic FMS II type moisture measuring installation has been used for decades in a wide range of industries to measure the moisture content of various materials in real time.
Low ppb ammonia monitor for the measurement of NH3 in air
Online TOC Analyzer - TOCADERO One
Water analysis of the next generation
All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels
The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
The stationary Flame-Ionisation-Detector (FID) iFiD NMHC measures with its built in NMHC Cutter the methane concentration and parallel in a second channel also the THC
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring of 2 channels parallel
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
selective detection of odour patterns
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
The Liebherr P78 sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes
The Liebherr in situ water content determination Litronic-FMS III-RMH12 is used to detect the water content (concentration determination)
Small, fine, excellent: The Liebherr P30-S sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes.
The CAN bus is used in on- and off-road applications, vehicles in the construction and agricultural sectors as well as in engines. The CAN bus is integrated in the sensor.
The Liebherr Litronic WMS II water content meter is used to measure the moisture or water content of a wide range of water content
- Evaluation of the complex dielectric in the high frequency stray field
- Freely scalable measuring range
- Material curve switching
- Sensor replacement without recalibration
- Temperature compensation
Liebherr offers certified sensors for determining the moisture in bulk materials for the potentially explosive atmospheres Zone 21 and 22.
A self-sufficient moisture measuring installation with high connectivity and many interesting possibilities. With ProfiNet technology on board, extensive signal processing and WEB-based access, we are ready for Industry 4.0.