Filter.
Type to search element
Type of measurement
Show More
Principal
Show More
Brand
Show More
Industry
Show More
Branch: Marine, Filtered results: 69
The Messenger is the electronics unit for up to 4 single-channel sensors. This may also be of different types. The measured values can mathematically linked and utilized.
The turbidity probe model 22E-LC uses the principle of light absorption to detect dissolved or suspended particles in liquids.
The ultrasonic probe model AS3, together with transmitter model AT3, has been specially designed to measure particle concentration in a variety of liquids.
The sensor model LAS uses the principle of light absorption to detect dissolved or
suspended particles in liquids.
The universal transmitter model Messenger can be used with all optical sensors of the
Monitek series.
The turbidity sensor Model MoniTurb-F uses the principle of 12° forward scattered light to detect suspended particles in liquids.
The turbidity sensor Model MoniTurb-S uses the principle of 90° side scattered light to detect particles in liquids.
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.
The AULA-254 Gold is a fully automated system for analyzing traces of mercury in aqueous and digested samples
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory.
The new generation Oxygen Analyser hart-protocol
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS)
Response time down to one second
Suitable for high temperatures
Multiple configurations
Multi-component analyzer
No interference from background gases
In-situ measurement
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases
The continuous velocity and temperature measurement is very important when operating a system with gas flows (for example indoor exhaust air, exhaust gases).
The oxygen ana;lyser OMD 14 is used for the measurement of the oxygen concentration in flue gases and process gases.
Industrial plants requiring approval are subject to strict requirements for compliance of emissions limit values.
Delivering the broadest range of measurement and analytical technologies for process clarity and insight.
In industry, active environmental protection means effectively reducing or preventing pollutants and impacts on the environment
This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces,
Fast response time
Wide variety of gases and applications
Well proven and robust design
Compact design
Low detection limit
Flame proof enclosure
Thermo Scientific™ Orion™ product line is well known around the world for excellence in water and liquid analysis. Our meters, electrodes, buffers,
The Thermo Scientific Orion electrode line offers a wide variety of quality pH electrodes to choose from.
Measurement by ISE can be performed in virtually every laboratory. ISEs measure ion concentrations in samples such as water, food, pharmaceuticals and biological samples.
Electrical conductivity is an inherent property of most materials, and ranges from extremely conductive materials such as metals to non-conductive materials like plastic or glass.
Dissolved oxygen is often referred to as DO. It is a measure of the amount of oxygen in a solution.
Colorimeters and Turbidity meters both employ optical measurements. Optical measurements use light to quantify the amount of a colored or cloudy sample.
Perform routine water quality parameter measurements in your wastewater and drinking water
Get reliable, high performance conductivity measurements with the durable Thermo Scientific™ Orion™ 2002SS and 2002CC Conductivity Cells.
Continuously monitor oxygen across a wide variety of low and trace level ppb level applications with the Thermo Scientific™ Orion™ 1816DO Low-Level Dissolved Oxygen Analyzer
Get continuous online monitoring and control of steam cycle and boiler chemistry with the Thermo Scientific™ Orion™ 2117LL Low-Level Chloride Analyzer, for use with power generation applications requiring chloride measurement at trace levels.
Concentration, NIR, VIS, UV & color measurement for both liquid and gas.
Process photometer for color and concentration measurements
Process photometer for UV measurement in gases and liquids
Process photometer for NIR measurement for concentration and trace water measurements
Industrial Turbidimeter for turbidity measurement in accordance with International Standard ISO7027:1999(E).
industrial Fluorescence and turbidity meter for the measurement of oil in water
Multi-component analyzer
Single-flange solution
No interference from background gases
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
The Protea 2000 emissions monitoring system is approved for the analysis of exhaust gases from the engines and boilers of ships and offshore rigs. Robust and with proven reliability, up to six gases can be measured including SO2, CO2 and NOx.
Thanks to the compact fine dust sensors of Dr. Födisch Umweltmesstechnik AG there are low cost measuring devices for industrial applications.
Online TOC Analyzer - TOCADERO One
Water analysis of the next generation
Modular mercury stack gas monitor
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)
All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels
Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements
The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
measurement of up to 8 infrared components and oxygen
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
The Liebherr P78 sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes
The Liebherr in situ water content determination Litronic-FMS III-RMH12 is used to detect the water content (concentration determination)
Small, fine, excellent: The Liebherr P30-S sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes.
The CAN bus is used in on- and off-road applications, vehicles in the construction and agricultural sectors as well as in engines. The CAN bus is integrated in the sensor.
The Liebherr Litronic WMS II water content meter is used to measure the moisture or water content of a wide range of water content
- Evaluation of the complex dielectric in the high frequency stray field
- Freely scalable measuring range
- Material curve switching
- Sensor replacement without recalibration
- Temperature compensation
Liebherr offers certified sensors for determining the moisture in bulk materials for the potentially explosive atmospheres Zone 21 and 22.
A self-sufficient moisture measuring installation with high connectivity and many interesting possibilities. With ProfiNet technology on board, extensive signal processing and WEB-based access, we are ready for Industry 4.0.