Gas Analysers(57) Filter: gas analysers => industry: energy
country
Request information
Request information for: Gas Analysers(57) Filter: gas analysers => industry: energy
EcoPhysics nCLD822M
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
FID VOC analyser iFID SHED
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
Oxygen Transmitters
We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.
atmosFIRt
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.
Promass
Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.
atmosFIR
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,
atmosFIR CEM
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.
atmosFIRi
atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use
atmosFIRw
The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.
Atex Gas Analyser
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area
Solus Multipoint NH3
The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).
ProtIR 204M
Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.
FID analyser iFID Wall
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
LaserInspect CIMO4
All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels
T-Flange
Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements
Dew point meter HDT
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
SM-4 QAL1 mercuryanalyser
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)
..Ultramat/Oxymat 6
..Combinatie van de Ultramat 6 en Oxymat 6 meetsystemen in 1 19” behuizing tot een compacte plaatsbesparende oplossing voor meting van 2 NDIR componenten en zuurstof.
ECO PHYSICS nCLD EL S
The nCLD EL S is the next generation in single-channel NO/NOX measurement. Unique in speed and precision
FID Analyser Fidamat 6
Gas analyzers with an FID (flame ionization detector) are well suited for the continuous total hydrocarbon measurement.
..Siemens Ultramat 23
Versatile , economical, multi- component NDIR + O2 analyzer for continuous measurement
Siemens Ultramat 6
The summit analyzer area for a wide variety of applications in highly corrosive and complex applications.
Combustion efficiency Analyzer
It can be used for measurement of the concentration of CO, CO2 and O2 in sample gases simultaneously.
Online NDIR Flue Gas Analyzer
Gasboard 3000 flue gas analyzer can be used for measurement of the concentration of up to 5 gases such as SO2, NO,CO, CO2 and O2 components in sample gases simultaneously
Biogas Syngas Analyser
A complete wall-mounted biogas analysis system consists of a rack type biogas analyzer Gasboard-3200, metal case, and gas conditioning system
Ankersmid Paramagnetic Analyzer
The Ankersmid APA Series is a precise oxygen gauge for continuous monitoring purposes. The instrument is microprocessor controlled with self-diagnosis capability
Xentaur Dew Point Extractive Sampling System
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Flow Measurement Devices
The continuous velocity and temperature measurement is very important when operating a system with gas flows (for example indoor exhaust air, exhaust gases).
LaserGas™ II SP Hydrogen
In-situ measurement
Suitable for hazardous environment
Continuous internal health check
Portable Mercury Meter 3000 XS
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases
Mercury VM-3000
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Automatic mercury stack gas monitor SM-3
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
Mercury Monitoring System MMS
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Highly sensitive mercury analyser UT3000
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
Mercury Calibrator MC-3000
The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.
ECO PHYSICS nCLD 822 SSdhr
The solution for simultaneously measured NO and NOx has got a name: CLD 822. The heated inlet copes with hot and humid gas samples no gas cooler required!
Serani Software
Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop.
Spark platform
The Spark is the lowest cost CRDS analyzer on the market, offering powerful performance on a budget, plus the highest range (5 orders of magnitude!) and fastest speed of any Tiger analyzer! Available for detection of H2O and other molecules in a variety of matrices, the Spark is ideal for cylinder analysis in industrial and medical gases, and many other applications.
CO-Rekt
The CO-rekt allows the use of Tiger's powerful CRDS technology in harsh industrial environments. Outfitted with a purged enclosure, the CO-rekt meets Class I, Div 2 specifications for use as CO, H2O, CH4 and CO2 analyzer in SMR and HyCO processes, among others.
HALO Platform
The HALO is our most versatile analyzer, with a perfect blend of high performance, compact footprint, and cost efficiency. The HALO is used to analyze an enormous variety of gases, including hydrides, fluorides, rare gases, and more.
LaserTrace System
The LaserTrace is our most powerful trace gas analyzer with detection limits as low as 50 ppt, capable of measuring four molecules at a time on up to four separate lines. The system is the semi industry standard to monitor H2O, CH4 and O2 in bulk gases, but is also available for many other molecules and applications.
Prismatic 2
The Prismatic 2 is a multi-species analyzer capable of monitoring up to four trace molecules in a single gas stream. It is an ideal solution for applications that require the simultaneous analysis of multiple analytes in real-time, for instance, quality control of fuel-cell grade hydrogen or monitoring of unmanned ASUs.
Tiger-i platform
For environmental monitoring and analysis in ambient air, Tiger Optics packages Cavity Ring-Down Spectroscopy in the compact, watchful Tiger-i.
Aloha H2O series
The ALOHA H2O series offers the world's best detection limits for moisture in ammonia (as low as 2 ppb). Ultra-pure ammonia is a critical building block for the manufacture of HB LEDs and for advanced GaN on Si devices.
Protea 2000 In-Situ infrared gas analyser
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS)
LaserGas™ iQ2 Vulcan
Multi-component analyzer
Single-flange solution
No interference from background gases
LaserGas iQ2
Multi-component analyzer
No interference from background gases
In-situ measurement
LaserGas II MP Cabinet
Very low detection limits
ATEX and CSA certified
Short response time
LaserGas™ II SP
Fast response time
Wide variety of gases and applications
Well proven and robust design
Mobile mercury ultratrace analyzer for natural gas UT-3000 NG mobile
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants.