Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers

Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not necessary.

PRO version permits multichannel networked system for plant-wide monitoring of emissions (for up to 32 sensors)

FEATURES & BENEFITS

• Full colour, icon-driven menu and display
• Two independent alarm set points
• Relative dust reading on clear scale 0-100%
• Dust “Overrange” icon
• Security setting
• Digital Signal Processing
• Field upgradeable

MAIN APPLICATIONS

• Stacks after bag filters, cartridge filters, cyclones
• Variable velocities within range 4-30 m/s (typical bagfilter velocity ranges), constant velocity required outside this range

Typical Applications

• Incineraton
• Metals (eg Steel/Aluminium)
• Minerals (eg Cement/Gypsum)
• Chemicals (eg Detergent / Ti02)
• Food (eg Milk Powder / Tobbacco)
• Power (eg Boilers/Biomass)

TECHNICAL SPECIFICATIONS
Measured parameters	Dust
Technology	ElectroDynamic™ Advanced Probe Electrification
Measurement/Monitoring capability	0-500 mg/m³*
Stack/Duct diameter suitability	up to 6m
Flue gas temperature	up to 800°C
Baghouse	YES
Cartridge Filter	YES
Ceramic Filter	YES
Coalescent Filter	YES
Cyclone	YES
Electrostatic Precipitator (ESP)	/
Wet Electrostatic Precipitator (WESP)	/
Wet Scrubber	/
Sensor variants	Stainless Steel
QA checks	N/A

TECHNICAL DATA
Monitoring capability	0-500 mg/m3
Sensor Variants	Stainless Steel (standard)
Stack Temperature Ranges	0-125°C standard, up to 800°C option
Outputs	2 x Digital Alarms (1 x 4/20mA Option)

APPROVALS & CERTIFICATIONS

• Ex Zone 22
• US EPA MACT Compliant BLD

Documentation