Client Portal (Certification)
Change the language of the site          
Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents
Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers
Farmer measurements, NH3, emmision
Reduced Oxygen Reduced Breathing Device, Gas mixing systems
Refractometers, Color measurements and Calcium
Service, Preventive and corrective maintenance, 24/7 contracts
Marine emission monitoring
Home > Gas Analysers > Proces FTIR analyzers > ProtIR 204M
Measuring Carbon dioxide CO2 Carbon monoxide CO Hydrocarbons CxHy Methane CH4 Nitric oxide NO Nitrogen dioxide NO2 Oxygen O2 Merk: Protea Techniek: FTIR, Interferometrie Industrie: Airforce Automotive Chemical Energy Food & Beverage Glass and ceramics Petrochemical Pharmaceutical Water & Environment Type meting: extractive Lab System

ProtIR 204M
Request information

 Request information for: ProtIR 204M




letters are small [0 is a zero] and [o is a letter O]
letters are small [0 is a zero] and [o is a letter O]

The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic nitrogen purging, in-built pressure and temperature alarms, analogue and digital I/O it is a complete site-ready back up CEM.

The ProtIR 204M and PAS software have been designed to allow stack emission monitoring to be carried out to the Environment Agency’s Technical Guidance Note M22 Measuring stack gas emissions using FTIR instruments (TGN M22) as simply and quickly as possible. With the built-in Standard Analysis Model for common gases there is no complex set-up of analysis required. The software as built-in calculations for drift and residual analysis, following the methods described in TGN M22.

Documentation

ProtIR 204M Brochure ProtIR 204M Brochure