Client Portal (Certification)
Change the language of the site          
Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents
Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers
Farmer measurements, NH3, emmision
Reduced Oxygen Reduced Breathing Device, Gas mixing systems
Refractometers, Color measurements and Calcium
Service, Preventive and corrective maintenance, 24/7 contracts
Marine emission monitoring
Home > Gas Analysers > gas analysers => type: in situ

Gas Analysers(36) Filter: gas analysers => type: in situ
Request information

 Request information for: Gas Analysers(36) Filter: gas analysers => type: in situ




letters are small [0 is a zero] and [o is a letter O]
letters are small [0 is a zero] and [o is a letter O]

 

Protea 2000 In-Situ infrared gas analyser

Protea 2000 In-Situ infrared gas analyser

Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS) 

Lees meer >
Dew point meter HDT

Dew point meter HDT

Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements. 

Lees meer >
Oxygen Transmitters

Oxygen Transmitters

We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations. 

Lees meer >
LaserGas™ iQ2 Vulcan

LaserGas™ iQ2 Vulcan

Multi-component analyzer
Single-flange solution
No interference from background gases 

Lees meer >
LaserGas™ II SP Hydrogen

LaserGas™ II SP Hydrogen

In-situ measurement
Suitable for hazardous environment
Continuous internal health check 

Lees meer >
T-Flange

T-Flange

Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements 

Lees meer >
LaserDust

LaserDust

Response time down to one second
Suitable for high temperatures
Multiple configurations 

Lees meer >
ZKM 1 & ZFK 8

ZKM 1 & ZFK 8

This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, 

Lees meer >
LaserGas™ II SP

LaserGas™ II SP

Fast response time
Wide variety of gases and applications
Well proven and robust design 

Lees meer >
Dustmonitor QAL 260

Dustmonitor QAL 260

MCERTS QAL1 approved, stand alone or multi-sensor Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes 

Lees meer >
LaserGas III

LaserGas III

Compact design
Low detection limit
Flame proof enclosure 

Lees meer >
Dustmonitor STACK 980

Dustmonitor STACK 980

MCERTS EN 15859 Filter Dust Approved Particulate monitoring system providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters 

Lees meer >
Dustmonitor Stack 990

Dustmonitor Stack 990

TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters 

Lees meer >
LaserGas III Ultra

LaserGas III Ultra

Process control & process safety in a single analyzer
Designed for long OPLs & high ranges
Baseline-insensitive 

Lees meer >
Oxymitter 5000

Oxymitter 5000

The new generation Oxygen Analyser hart-protocol 

Lees meer >
Dust measurement

Dust measurement

from filter monitoring to certified dust measurements 

Lees meer >
Dustmonitor STACK 602

Dustmonitor STACK 602

TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including Baghouses and Electrostatic Precipitators 

Lees meer >
Flow Measurement Devices

Flow Measurement Devices

The continuous velocity and temperature measurement is very important when operating a system with gas flows (for example indoor exhaust air, exhaust gases). 

Lees meer >
Dustmonitor STACK 710

Dustmonitor STACK 710

QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks 

Lees meer >
Dustmonitor DM 170

Dustmonitor DM 170

The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial applications. 

Lees meer >
Dustmonitor QAL 182 WS

Dustmonitor QAL 182 WS

QAL1 approved ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams 

Lees meer >
Dustmonitor QAL 991

Dustmonitor QAL 991

QAL1 approved particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters 

Lees meer >
Complete QAL 1 systeem MIR IS

Complete QAL 1 systeem MIR IS

"all-in-one compact" system, built-in SEC sampling system at the sampling location. No sampling line needed
HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, CH4 (TOC), HF, N2O, O2 

Lees meer >
Dust Monitor DM210

Dust Monitor DM210

Using the patented ElectroDynamic™ technology the DUST MONITOR 210 is a Filter Leak Monitor suited to filter control applications after fabric dust filter type (baghouse) arrestment plant. 

Lees meer >
LaserGas II SP Compact Monitor

LaserGas II SP Compact Monitor

Fast response time
Wide variety of gases and applications
Compact design 

Lees meer >
Dust monitor STACK 181 WS

Dust monitor STACK 181 WS

US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams 

Lees meer >
Dustmonitor QAL 181

Dustmonitor QAL 181

QAL1 Approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes 

Lees meer >
Dustmonitor STACK 181

Dustmonitor STACK 181

US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes 

Lees meer >
Dustmonitor QAL 360

Dustmonitor QAL 360

TÜV QAL1 and MCERTS Approved, Stand alone or networked system option Particulate CEM providing high quality emission measurement for dust concentrations from industrial processes 

Lees meer >
LaserGas iQ2

LaserGas iQ2

Multi-component analyzer
No interference from background gases
In-situ measurement 

Lees meer >
LaserGas™ Q ICL

LaserGas™ Q ICL

Fast response time
Stable calibration
Suitable for very high dust load 

Lees meer >
LaserGas Q CF4

LaserGas Q CF4

Fast response time
Stable calibration
Suitable for very high dust load 

Lees meer >
Electrodynamic Dust Monitor View 370

Electrodynamic Dust Monitor View 370

Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers 

Lees meer >
Electrodynamic Dust Monitor View 820

Electrodynamic Dust Monitor View 820

Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. 

Lees meer >
Electrodynamic Multisensor Dust Monitor View 800

Electrodynamic Multisensor Dust Monitor View 800

Electrodynamic Multi sensor Dust Monitor View 800 

Lees meer >
LaserDust

LaserDust

Response time down to one second
Suitable for high temperatures
Multiple configurations 

Lees meer >