Gas Analysers(28) Filter: gas analysers => industry: marine
country
Request information
Request information for: Gas Analysers(28) Filter: gas analysers => industry: marine
EcoPhysics nCLD822M
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
FID VOC analyser iFID SHED
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
FID analyser iFID Wall
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
Portable FID analyser iFiD
The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment
Total FID Analyser FID iFID Rack
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
LaserInspect CIMO4
All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels
T-Flange
Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements
Dew point meter HDT
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
SM-4 QAL1 mercuryanalyser
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)
FID Analyser iFID NMHC Mobile
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
ZKM 1 & ZFK 8
This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces,
Xentaur Dew Point Extractive Sampling System
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Flow Measurement Devices
The continuous velocity and temperature measurement is very important when operating a system with gas flows (for example indoor exhaust air, exhaust gases).
Portable Mercury Meter 3000 XS
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases
Mercury VM-3000
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Automatic mercury stack gas monitor SM-3
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
Mercury Monitoring System MMS
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Highly sensitive mercury analyser UT3000
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
Mercury Calibrator MC-3000
The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.
Protea 2000 In-Situ infrared gas analyser
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS)
LaserGas™ iQ2 Vulcan
Multi-component analyzer
Single-flange solution
No interference from background gases
LaserGas iQ2
Multi-component analyzer
No interference from background gases
In-situ measurement
LaserGas™ II SP
Fast response time
Wide variety of gases and applications
Well proven and robust design
LaserDust
Response time down to one second
Suitable for high temperatures
Multiple configurations
LaserDust
Response time down to one second
Suitable for high temperatures
Multiple configurations