Portable Automated Measuring System PG-350 P-AMS
Measurement So Easy It's Almost Instinctive
Portable and lightweight with laboratory-level precision
The New Possibilities of Gas Analysis Begin with "Precision Mobility"
For situations when you can only take measurements in the field, but you want the same precision that you get in the laboratory: HORIBA presents the Portable Automated Measuring System - PG-350 P-AMS.
The HORIBA PG-350 P-AMS offers the same accuracy and reliability of laboratory
measurements in a portable and durable unit, that is light and has a faster response time.
With a shortened warm up time, a high visibility touch screen, high accuracy in measuring crucial components in the field and the durability to facilitate mobile measurement, the HORIBA PG-350 P-AMS is the analyzer system of the future.
Functions
Advanced measurement needs met with advanced features.
- Cross-Flow Modulation Type Detectors
- Short Warm-up Time
- Timer Function
- Ethernet Capability
- IP42 protection class
The HORIBA PG-350 P-AMS System Concept
The portable measuring system HORIBA PG-350 P-AMS consists of a portable probe (PSP-4000H), a heated line, a gas sampling system (PSS-5H) and the PG-350EU as the gas analyzer. The system fulfils the requirements of the EN 15267 part 1, 2 and 4 for the periodic measurement of stationary source emissions from stationary sources (QAL1).
Cross-Flow Modulation - Advanced Efficiency for NDIR analysis
In the PG-350EU analyzer, Cross-Flow Modulation (CFM) is employed for the Non-Dispersive Infrared Absorption (NDIR) of SO2 and CO detectors. With the NDIR CFM method, sample gas and reference gas flow into a single measurement cell switching from one to the other. This has the advantage that no optical adjustment is required, the zero point is kept stable, it reduces span drift and the sample cell remains clean.
The CFM method has already been employed for the Chemiluminescence NOX detector in the previous model and delivers the same benefits.
Reduced response time for SO2 analyzer *
The response time of the SO2 analyzer is faster than on the previous model, PG-250, increasing the overall measurement performance.
IP42 compliant according to EN 60529
Building on the success of the previous PG-350 generation, the entire system has an IP42 degree of protection, affording protection against dust and light rain, and can therefore be used in demanding and challenging measuring locations.
Collecting data over LAN network **, RS-232 and Analog
Standard Ethernet interface for connecting to LAN environment, enables real-time data transfer. Once the network connection such as LAN has been set up, data can be downloaded while you are staying in the office or the laboratory, a distance away from where the PG-350EU is operating.
Warm-up time has been shortened, greatly reducing the instrument’s ready-to-measure time
Previous models (e.g. PG-250) required an hour of warm-up time. This has been reduced to 30-minutes for the PG-350EU, greatly reducing the time required for measurement preparation (at 20°C Ambient temperature).
Timer function enables automatic instrument start and sleep modes
For example, setting the PG-350EU’s automatic start time ahead of when measurements are needed, eliminates your need to wait for the instrument to warm up; it will be ready when you are. There is also a sleep mode that reduces power use when the unit is idle.
* SO2 is not part of the measuring system certified according to EN 15267-4 (as of date of printing)
** Requires separate software